Looking for Clutch Lever Help

[bump]

Yes the bracket mounts at the front of oil tank. Then use a cable from a later shovelhead. Call Calif. Phil

[JamLazyAss]

Does anyone have a picture of a cable end (hand lever end) from a 72 to 78 Shovelhead?

[kd]

Jam, remember that you will need the shorter lever on the transmission too.  You'll wonder why you didn't do it sooner.   

[crock]

Had a mouse trap on a 65 pan head. Loved the way it felt but was a pita to get adjusted. Loved the looks. If I had one on my bike, I would leave it, If its not there I would not go through the trouble. I would think using a shovel head release arm and related components you should make it work

[billbuilds]

     Here's a photo shows most all on cable perch end. Meant to post this sooner, got sidetracked.

[JamLazyAss]

     Here's a photo shows most all on cable perch end. Meant to post this sooner, got sidetracked.

I have three cables, and none have that collar that yours has.
That's why it is getting pulled thru. 

[Ohio HD]

Download the Barnett catalog.....


Barnett Catalog



Go to page #28, and look at the bottom of the page. Then call Barnett.

[FSG]

break out the circlips .........  even a twitch of fencing wire will geterdone




learn something new every day, didn't know they did this for the Ezy-pull

Ohio   

[JamLazyAss]

Who sells the 111-80-28619.
Can't find it on Barnett or J&P.

[kd]

I did a google search with that number and came up with Barnett's 2020 catalogue.

[Ohio HD]

This is not that complicated. They have a phone.   

https://www.barnettclutches.com/contact-us.html