Stock Cam in 103?

[Ironpig9]

Looked in my service manual to see if it identified the "stock" cam on a 2013 Deluxe. No luck. So, can anyone enlighten me as to what is the "stock" cam installed at the factory? What characteristics does the cam have etc? Thanks.

[rigidthumper]

Stock cam specs for your bike is as follows- -12° Intake open/30° close, 38° Exhaust open/04° close, 0.525" lift all lobes. No overlap, mild ramps, designed to pass EPA/CARB emissions tests, provide adequate power, be relatively quiet, and durable. Referred to as the "1 dot/2dot cams", as the lobes had dots stamped in them for easy identification.

[Ironpig9]

  Thanks Rigidthumper, that's what I was looking for. 

[boooby1744]

I'm probably wrong,but I thought the lift is .505

[hattitude]

"rigidthumper" pretty much nailed it... but I like pictures, easier for me to compare...

This is from the "Big Boyz" website...