Twin cam 88 cam plate torque

[oldskool]

Can someone post a pic of camplate/Oil pump torque sequence ? Or even instructions from manual.its been awhile and can't remember. In Sturgis and sons bike is down and I'm trying to get it back together for the ride home.

[Ohio HD]

Start at 40 in. lbs., then 80 in. lbs,. then finally 120 in. lbs.

[motorhogman]

Hope this helps.

[kd]

Remember that if the two positions where the dowels are located have not been converted to studs, they are very susceptible to pulling the threads.  DO NOT over torque them.  Clean all of the oil out of the holes to prevent any hydro lock also. Good luck on your repair.

[rigidthumper]

Remember, we cannot post copywritten pics. The sequence is a cross pattern starting with lower left plate fastener.

[motorhogman]

Remember, we cannot post copywritten pics. The sequence is a cross pattern starting with lower left plate fastener.

oooops 

[Hossamania]

Doesn't mean you couldn't hand draw one real quick and take a picture.

[FSG]

Doesn't mean you couldn't hand draw one real quick and take a picture.

or post a link to a picture that is hosted elsewhere ....  imgur as an example

[Hossamania]

Doesn't mean you couldn't hand draw one real quick and take a picture.

or post a link to a picture that is hosted elsewhere ....  imgur as an example

Yeah, I'm still working on that skill.

[motorhogman]

or send a PM ?  Never about that copy right thing.. Figured I own that manual and I paid for it... I know Wrong again... LOL