March 28, 2024, 10:26:07 PM

News:


Torque To Yield, Angle

Started by Don D, October 24, 2021, 08:24:02 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rigidthumper

Can not post copy right materials. You can post them to Imagur, then link to the image. See post #20 & 22
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

Admiral Akbar

As twisted as I am, I got it.. Let the CR material be hosted by a bigger site and let them deal with it.

No need to post the images as I typed in the info. If anyone want to check feel free. I'll use imgur the next time I need to post a CR image.

FSG

QuoteLet the CR material be hosted by a bigger site and let them deal with it.

+  :up: 

Don D

Cometic instructions for M8
1.Tighten the head bolts in the recommended X pattern to 20-30ft-lbs.
2. Loosen all head bolts one turn.
3. Tighten all head bolts using recommended X pattern to 9-11ft-lbs.
4. Tighten all head bolts using recommended X pattern to 25-27ft-lbs.
5. Final torque is a 90 degree turn using the recommended X pattern.