new headlight wiring placement

[Ironheadmike]

I'm installing a aftermarket headlight . Where do I reroute all the wires and plugs that are in the original headlight? BTW it's a 92 883 .

[14Frisco]

When I replaced the OEM headlight on my 1993 XL, I re-routed, well re-wired, most everything up-front and used two 15-pin connectors side-by-side that fit in the tank channel under the frame - there are no other connectors in front of those two 15-pin connectors.
It was a bit of a tricky job to ensure the lengths of the wires were correct before crimping on the pins and not being a professional wire-crimper or solder didn't help, but the outcome has worked well over the years.

You cannot see attachments on this board.
You cannot see attachments on this board.
You cannot see attachments on this board.
You cannot see attachments on this board.

[Ironheadmike]

Thank you . I was thinking of running down to where the ignition mod was . I didn't think they would fit where you put them . Again Thanks a ton .