March 28, 2024, 11:18:12 AM

News:


Exhaust mounting

Started by Excalibur, June 04, 2022, 05:24:59 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Excalibur

My Shovel project needs the exhaust mounted and the bracket isn't even close to fitting so I'll have to fabricate one.

Any good ideas out there to mount these in a reliable and practical manner? I suppose my first thought is to make a bracket from RHS box section. The front muffler is real close to frame so muffler bracketry will have to be underneath. Then I thought a second bracket on each muffler clamp. In the case of the front muffler-clamp, it could go to the redundant footboard lug.

Just trying to make something that works reliable and not following originality.

Thoughts, tips or chat welcome. Fire away, I start tomorrow.

Thanks!
You cannot see attachments on this board.