March 29, 2024, 06:51:38 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


FXR chain conversion

Started by Tattoo, August 11, 2022, 03:41:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tattoo

I have a 1992 FXR and im doing a chain conversion. im changing out tranny pulley spacer to the 94 & up (.600") that is thinner than my 92 one. for anybody who has done this what offset are you using for the front sprocket? the rear is a .250"...   

Thhank You....
"You can have anything you want
But you better not take it from me"

xlfan

Would that rear sprocket be a stock offset FL/FX 73-85? FXR's usually had much more offset than .250" IIRC.

Arseclown

Funny as I have an fxr with chain drive and would like to convert to belt....

Reddog74usa

I  used a 1/2 inch offset trans sprocket from PBI and a flat rear wheel sprocket. Not very difficult and with todays chains is a nice upgrade if you want more options for final drive ratio's and an occaisonal ride down unpaved roads
RIDE IT LIKE YA STOLE IT