News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Main Menu

Partial throttle detonation

Started by topcat3815, September 17, 2023, 05:03:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

topcat3815

Looking for help ,Have a 2014 limited recently installed Fuel Moto 107 kit with 10.25 compression piston, Andrews tw54h cam, reworked Don Dorfmam heads heads  .030 head gasket stock throttle body and injectors, S&S air cleaner, Fuel Moto header and Supertrapp fatshots. Iam using a power vision tuner with target tune and wideband sensors. There is a waiting list to get it dyno tuned so fUEL moto sent me a map to get it going. I am getting partial throttle detonation around 2400 to 3000 rpm,s I called Fuel Moto and they sent me another map with the same results, I removed 2 degrees of timing in PV mid range no help, Any and all replies are appreciated Thank You

kouack

Have you tried to do some autotune? Usually you want to fix the VE table before the ignition table. Make sure to save your map before, so you can revert back to it if needed.

rigidthumper

Is the detonation audible, or is it showing up on data logs?
If you can attach your map, and any data logs taken while using that map, maybe we could see what's happening?
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

topcat3815

It is audible, I need to check the data logs