May 30, 2024, 10:03:50 AM

News:


Adding a bike to Powervision

Started by Jim Bronson, May 23, 2024, 08:42:33 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Jim Bronson

Is it a big deal to add a bike to PV? I know it can be done, but I'm curious about the procedure. Also, can they replace one bike with another one or do I add a bike and delete the old one (I'll be selling the old bike.)
Thanks.
Going down that long, lonesome highway. Gonna live life my way.

Ohio HD

The first thing is to make sure that the PV you have will work with a new bike.

Jim Bronson

Quote from: Ohio HD on May 23, 2024, 08:51:20 AMThe first thing is to make sure that the PV you have will work with a new bike.
I'm not sure why it wouldn't except that the current bike is a twin cam and the new bike is an M8. Maybe worth an inquiry to Dynojet.
Going down that long, lonesome highway. Gonna live life my way.

Ohio HD

If the donor PV unit is for your 2013 Dyna, it's a PV-2B. The PV for 2021 and up is PV-3B.

rigidthumper

You can buy the proper cable, and a license, to tune the new2you M8 with your old PV. The PV Firmware must be updated, and DJ can help with that. You may have to leave Cali to get it done, tho ;)
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

Jamie Long

ANY Power Vision touch screen device can tune ANY bike (with the exception of 2024 new gen ECM's which are currently in development). You just need the appropriate data cable and firmare/tune database in the device. You can license additional vehicles either thru the Dynojet software or thru the Fuel Moto website.

Coyote

I always bought my licenses from the FMoto site. It's was easy to install.

Jim Bronson

Many thanks everyone. It looks like I'm golden; I just need a new data cable and license.
Going down that long, lonesome highway. Gonna live life my way.