JET boring 2005 OEM throttle body to 46.5mm

[blown alcohol]

I will be doing a 95" build on a 2005 RKC in a few weeks.
Build is HDstreetperformance CNC StreetPro heads, 10.5, Tman 590 cams, Fatcat 2-1, 3.37 primary

It's harder to search and find certain info on these older builds.
Does anyone remember what gains might be possible having JET bore the stock TB?
Cost to bore is $195

[wfolarry]

Waste of money IMO.
Since you're going with CNC heads find out what the port size is & get a TB to match from HPI. Ask Don what he recommends.

[blown alcohol]

Waiting on his reply, thanks

[hrdtail78]

I would recommend this, and have Don port match it.

Kuryakyn 2001-2005 Twin-Cam Wild Things Throttle Body And Manifold 440

[lonewolf]

https://www.ebay.com/itm/225503003855?epid=171155494&itmmeta=01HSV2MMG1MR9YTZBBZ1NP1A89&hash=item348106c4cf:g:ZJIAAOSw43NkJcT1&itmprp=enc%3AAQAJAAAA0AJXbUgbcUAtuETyy%2FFHzrr3InSs1QcAf3kP1yazwrAdR4FQBgEx4gPTxv1A6RrN9LG1uvmba%2FzUGLhRIzWwXJ0CU3pjzf6zdsxGmvEG5nH2NvJHCY%2F2T2fVHJEjiPsZ3MnvxydXQloO7frA1FVwNS0nhBec%2F0jA8AW6RyRy6%2BOirLX7YlRcA%2FenybGT7LSqM1%2FOsJS7H0TkESS%2BDQc%2BpijvuqaZY25guCAsuCp%2BhIUs3TZg2mOHJqAlzEmPfk16RHe6JGxIQADJqImUuGu%2FHsg%3D%7Ctkp%3ABk9SR47I0uLOYw

Isn't that the one that needs the unobtanium 1/4" spacer between the tb and manifold for touring bikes? They do work well tho.

[hrdtail78]

I don't know.  Here is one with the spacer. Look at breather spacing that is needed for AC.  This is a 2010 touring engine.   You cannot see attachments on this board.

[lonewolf]

I just remember I needed it on an '03 road glide. I bought 2 when they were clearing them out at $27. I doubt I have any pics.

[Coff 06]

On my 98" build that Don laid out for me.He suggested the
HPI 55/58 with 5.3 injectors and 1.8 intake.
Worked out great in my application.
           Coff 06

[blown alcohol]

Is the Kuryakyn 440 a 57mm throttle body and needs port matched to 1.8000 intake ports?
I have my heads back from Don, and wouldn't send them back to west coast for port matching. I could have local shop port match.

[hrdtail78]

The 440 is stock width, 57mm bore and I believe 1.6 ports.

On my 98" build that Don laid out for me.He suggested the
HPI 55/58 with 5.3 injectors and 1.8 intake.
Worked out great in my application.
           Coff 06

Absolutely.  The 55MFI is a great choice.

[Coff 06]

Stock 06 compared to the HPI 55.       Coff 06

You cannot see attachments on this board.

You cannot see attachments on this board.

[blown alcohol]

Don said Heads flow 270/218 on his bench.

[blown alcohol]

https://www.ebay.com/itm/225503003855?epid=171155494&itmmeta=01HSV2MMG1MR9YTZBBZ1NP1A89&hash=item348106c4cf:g:ZJIAAOSw43NkJcT1&itmprp=enc%3AAQAJAAAA0AJXbUgbcUAtuETyy%2FFHzrr3InSs1QcAf3kP1yazwrAdR4FQBgEx4gPTxv1A6RrN9LG1uvmba%2FzUGLhRIzWwXJ0CU3pjzf6zdsxGmvEG5nH2NvJHCY%2F2T2fVHJEjiPsZ3MnvxydXQloO7frA1FVwNS0nhBec%2F0jA8AW6RyRy6%2BOirLX7YlRcA%2FenybGT7LSqM1%2FOsJS7H0TkESS%2BDQc%2BpijvuqaZY25guCAsuCp%2BhIUs3TZg2mOHJqAlzEmPfk16RHe6JGxIQADJqImUuGu%2FHsg%3D%7Ctkp%3ABk9SR47I0uLOYw

Isn't that the one that needs the unobtanium 1/4" spacer between the tb and manifold for touring bikes? They do work well tho.

Do you have a part# for the spacer needed for touring bikes? I will ask the seller if he has that part. I would not buy this TB unless I can source the spacer needed for touring bikes

[lonewolf]

No, sorry it's been almost 10 years.

[hrdtail78]

It's 1/4 inch plate aluminum with 3 holes in it.  Dimensions can be found with outlet of TB or inlet of manifold.

[blown alcohol]

It's 1/4 inch plate aluminum with 3 holes in it.  Dimensions can be found with outlet of TB or inlet of manifold.

I have found one 442 spacer for sale. How much would it cost to have it duplicated?

[hrdtail78]

I have found one 442 spacer for sale. How much would it cost to have it duplicated?

Don't know.  Depends on your resources. I would make sure the spacer is even needed.  IME of retro fitting EFI and TB swaps from this to that.  The differences between stock TC heads is flange bolt location.  There is no difference in head dimensions from port to breather hole.

[rigidthumper]

Have you ever seen any body offer just the manifold for the Kury TB?

[blown alcohol]

There is only one spacer in this package.
If you scroll through the pics it shows on front package that the spacers are needed for road king and dressers
My question is why?

https://www.ebay.com/itm/225962360415?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cWrvyjV9Q8C&sssrc=4429486&ssuid=SKQp9ymFSLW&var=&widget_ver=artemis&media=COPY

[jsachs1]

IIRC, Mike epoxied the manifold area spacers on the 57 mm Kury throttle bodies. I have that TB on my 05' CVO Electra Glide, and will check. Jims machining sells spacers. Check with them on bolt pattern, and dimensions.
John

[blown alcohol]

IIRC, Mike epoxied the manifold area spacers on the 57 mm Kury throttle bodies. I have that TB on my 05' CVO Electra Glide, and will check. Jims machining sells spacers. Check with them on bolt pattern, and dimensions.
John

John let me know what you find when you can look at the throttle body on your bike.
What do these spacers clear whne used on touring model? Are they really needed is the question?

[blown alcohol]

I have the Kurykayn throttle body and spacer on the way.

What is a good air cleaner to pair with it?
Big sucker or screamin eagle?