News:

Main Menu

Tman 662-2 vs 662-2PS2

Started by 319fatboy, April 05, 2024, 05:01:02 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

319fatboy

I am currently running a Tman 662-2 cam in my 124 with ported 110 heads set at 11-1 compression with a boarzilla. I was wondering if I would gain anything going to the Tman 662-2PS2 cam? 

rigidthumper

Minor change in exhaust timing, slightly quieter ramps. Power is almost identical ( within 1%)
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

319fatboy

Quote from: rigidthumper on April 05, 2024, 07:23:05 PMMinor change in exhaust timing, slightly quieter ramps. Power is almost identical ( within 1%)
Are there any cams you would recommend to maybe make the same or more power and run quieter?

itsafatboy

So i will prob get told wrong but i like the woods tw9bg , bet it would run good but not going to be any quite,   

i run the the tw9bg in a 116" fatboy at 11.5 comp and a +2 advance key and it runs great the +2 was because i didnt have another key and i dont think the +2 does anything on the gear drive or not much, also run a boarzilla, and so on

here are some dyno runs with 124 on woods sight but will have to look at carb dont see a lot of 124 injected

if it wasnt so noisey and probably a little short but the Tw8g is a awsome cam got 132hp 140tq on my 116" 5th gear pull and had 3.37 gearing at about 10.8 or so comp it pulled like a race horse, i havent dynoed the tw9bg yet and a lot of other changes           

rigidthumper

Ignorance is bliss, and accuracy expensive. How much of either can you afford?