May 30, 2024, 09:48:29 AM

News:


tts barometric setting

Started by jpbo, May 08, 2024, 06:39:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jpbo

Good day
i need some help with brometric setting, first i followed the tuning for dummies, no mention for baro setting, bike run great. Reading the tts tuning guide i saw i skipped the need for barometric setting first, so i think i have to start a new tuning .Reading tts tuning i'm confused with setting baro at first. is someone can explain to me how collect datas and make corrections in table?
any help will be appreciated
thank you  :banghead:

rigidthumper

Model/year/mods/calibration # you are using would be helpful.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

jpbo

it's M8 2017, stage 2, cannon slip-on and tts cal GOE800-03-A0.MT9 with tts 100 cam
i vtune and make spark, it run good but i missed the first step barometric setting

thanks :scratch:

rigidthumper

If you're referring to MAP Normalization Gain table, you need a dyno and a weather station- not worth messing with on the street.
If you are referring to the Minimum TPS for Baro Correction, it's already set for a 107/TTS100 combo in that map, no need to change.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

jpbo

ok sounds good thank you very much for advice :up: