Wiring Question

[Garagerat]

Here is a pic of a new bare HD plug that accepts four wires. What do I need to do to the four incoming wires to make this plug have a sound electrical connection?

You cannot view this attachment.

[FXDBI]

Reference a electrical manual they show how to service and dress the different electrical connections used on the bike installing pin ends ect.   Bob

[Jim Bronson]

Assuming you have the correct pins, either crimp or solder the wires to them and push them into the connector housing. Pretty easy.

[hrdtail78]

That is a 150.2 series connector.  Takes Metri-pak terminals for that series. (12124075}  These are pull type.  You push wires through connector.  Crimp terminals with proper crimper and then pull into connector.  That 4 plug is common for IACs.

[Garagerat]

That is a 150.2 series connector.  Takes Metri-pak terminals for that series. (12124075}  These are pull type.  You push wires through connector.  Crimp terminals with proper crimper and then pull into connector.  That 4 plug is common for IACs.

Thank you so much. This is exactly the information I needed.