Contradicting info

[Wookie3011]

Ive been in and out of my Beta 2016 FLSTFBS a few times. Each time I look in the service manual it shows chain guide screen and Oring going screen then Oring. The parts book shows it going Oring screen? When I first took it apart it was Screen Oring. Which is Correct?

[FSG]

screen then o-ring .....

the o-ring need to seal against the camplate 

[Wookie3011]

Thanks, I installed it backwards because that's the way I found it and should of asked instead of assuming. So this is the path to the balancers. Wonder what I'll find once in there. I've read the DT3 threads and PERHAPS the over tension of the balancer guides but this may suggest the opposite for my situation. Either way I bought Blue this time around and will place the DT3 and R&R setup in the future pile of parts builds. I see my pictures disappeared and logic would suggest I posted pictures that where not allowed due to copyright? Sorry

[FSG]

I see my pictures disappeared and logic would suggest I posted pictures that where not allowed due to copyright? Sorry

I see that now as well ......  best thing to do is upload the image/screenshots to an image hosting site and then just post the link to it here .....

I use imgur  https://imgur.com/

[FSG]

[Wookie3011]

Thanks FSG