Need simple Dyna S single fire wiring direction

[stroker800]

I need a simple wiring for Dyna S single fire set up...website has changed they're lay out..this bike is going to use a single/ single fire coil..
thanks Dave

[CraigArizona85248]

Dave,

The red wire from the Dyna S module connects to 12V.  The black wire is the trigger for the front cylinder.  The white wire is the trigger for the rear cylinder.  Your single fire coil should have three posts on it.  Usually the center post is the 12V connection.  The other two posts are front/rear coil triggers.  The post closet to the spark plug wire connection on the coil should trigger that connector.

Typical single fire coil looks something like this...


-Craig

[CraigArizona85248]

Here is a better drawing for your Dyna S (single fire) ignition.  I started with another manufactures drawing and fixed the wire colors to match what the Dyna instructions say.

-Craig

[stroker800]

I lookin for the wiring colours,,,,red,to,,,blk to ,,white to ,,orange to ?  
thanks Dave

[CraigArizona85248]

Red to 12V
White to Rear Cylinder coil trigger
Black to Front Cylinder coil trigger
Orange?  They don't list an orange wire for the Dyna S single fire ignition.

[stroker800]

  Thats whats got me ,,,i believe this is an old stock unit...I,m pretty sure te orange goesto the same post as red...thanks Craig for your time..
Dave