2008-2009 FBW TTS Calibration (96" SE 255, AC, slip-ons)

[jfh342]

Here's an opportunity to recoup some of your tuning expenses. I am looking to purchase a TTS calibration for a 2009 FBW 96" w/SE 255 cams, slip-ons, and A/C. Send me an email or PM if you have the calibration and desire to sell a copy.

Thanks

[wurk_truk]

I'm going to watch this thread.

You should name the A/C and name the slip-ons.

[jfh342]

I'd be happy to get a calibration for the 96" SE 255 setup with any A/C and pipe combination.

For the record,this particular build includes Rhinehart slip-ons and S&S Single-bore tuned runner induction system.

[hog yild]

I've been told by a few of the experts here to start with the TTS MasterTune map for the 103ci Stage 2 build, with the 255 cams. Change the displacement to 96.7ci stock and then do a Vtune. I'm hearing you will get very good results from that. Can anyone ring in here on this?

[eddfive]

I doubt that any cal file on a CD will have anything for your S&S single throat TB.  The best way is to start with a base calibration that is close and get it tuned.  You can start with any of the available tuners on the market and go from there.  It really boils down to if you want to try and tune it yourself or have it professionally dyno tuned. There are a number of choices out there and a Professional tuner can give you insite on each one.

[jfh342]

I am using the TTS Mastertune and was hoping to find a good base calibration to start from. If I cannot get a calibration for 96" w/SE 255 cams, I will start with either the 103 Stage II calibration or the  96" Yuill with A/C, Exhaust and YB 12S cams.