Steve Cole Question

[wavlovr1]

Steve,

using a TTS tuner on an 09 SG. I understand that the CLB offsets the areas set for closed loop (14.6) but still have confusion about areas set outside of closed loop.

ie; If 80% to 100% range is set 13.0; is it really running 13.0 or is this setting also offset (by CLB voltages) outside of closed loop operation?

Thanks, jb

[Steve Cole]

If you have dialed all the VE's in with the offset in the bias table then the numbers displayed on the AFR table will all be off by the amount offset.