02 road glide windshield replacement

[akcruz]

Looking to replace w/shield with either Clearview with or without recurve or National Cycle vstream.Anything out there thats better? Ideas, opinions,comparisons greatly appreciated! Thanks....

[dunbarton]

I have and like Memphis Shades. http://www.memphisshades.com/ Very reasonably priced for a quality product. I don't think theirs are recurved, at least mine isn't, but that hasn't been a prob at all.

[roadglide65]

Have you looked at http://www.windvest.com/ And  http://www.ceebaileys.com/harley/

[Ed Y]

I prefer to deal with Clearview although $$ is more than some, because if you order one, you can install it with the protective covering left on, try it out and if you need to swap it out for a shorter or taller one, it only costs you shipping charge. Getting the right height windshield is sometimes hard to do the first time.

[Deye76]

IME the re-curve on the Clearview works.

[jimrookie]

 The Clearview works for me ...John from Clearview asked my height,inseam and weather I ride two up or not.also asked if I like to look over or through and the windshield they sent was a perfect fit and its held up crystal clear for 4 years now
I would buy another one for sure

[akcruz]

Thanks to all that replied,3 in a row for Clearview so that is who I went with.Ordered one up today,got to talk to John,great help and a wealth of info. Ended up getting a 16" clear with recurve,should do the deed. Thanks again for the advice!!

[ch308]

Good choice. I'm on my second windshield from them. One for the RK and now one on the RG. Great customer service and a great product. 

[seattledyna]

the clearview on my 09 RG absolutely cured the buffeting issue! great quality with good optics as well

[northbrun]

Not trying to steal the thread, but I just have 1 question.  Can any of the listed windshields be used as replacements for oem windshields? Meaning, just the lexan replacement?

[seattledyna]

do you meen the same specs as the OEM shield?

[northbrun]

I guess what i'm asking is this... Can I buy an aftermarket lexan that will fit (bolt on without mogifacation) to the oem hardware.

[ch308]

When I ordered my Clearview shield it came with a new rubber seal and new well nuts. That's really the only windshield hardware on a RG. The OEM well nuts will work with the Clearview shield but the rubber seal will not. The Cleaview is a little thicker. I hope this helps.

[Ed Y]

I guess what i'm asking is this... Can I buy an aftermarket lexan that will fit (bolt on without mogifacation) to the oem hardware.

I've got an 02 RG with a 16" Clearview on it. As mentioned, Clearview will send replacement wellnuts and screws, along with a rubber gasket. Use their stuff. Bolts right on.

[seattledyna]

yep, like the guys say, it does bolt right on!