News:


Main Menu

What are you Riding?

Started by 03hdfatboy, November 02, 2008, 03:53:39 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

hotroadking

Quote from: PoorUB on December 19, 2008, 05:10:02 AM
Quote from: hharley2002 on November 14, 2008, 10:24:54 AM
I thought for sure at least half of the forum would answer my EX.   

Naw, I've seen her, I wouldn't touch your ex either!! :hyst:

Click attached response LOL

[attachment removed after 60 days by system]

cranky

2000 FXD
Stock Bore
Bob Wood TW6G Gear Drive Cams w/+3* Key
Crane Adj Push Rods
Dyna TC88-1 Ign Module
Hooker 2-1 Exhaust
Stock CV with Sporty Needle and massaged vacuum piston
Easy Boy Clutch effort assist


35,000 trouble free miles. 40-45 mpg and will and has ran many tanks of gas at 90-100 mph on the way to or from Sturgis.
Ride Hard, Ride Safe, Live Long, Die Hard.

Barrett

#127
001.MOV 08 FXDF 96", Big Boyz heads, 37's w/1.725 rockers, T-Max, Supermeg, K&N, Barnett Clutch, 30T Pulley and a few other things.

Guitarplayer


marc

04 GeezerGlide, VPC, K&N Air Filter, PC-III, Andrews 26 G's, 6 speed OD & Screamin Chicken pipes...

blacknightrain

depends on what I feel like that day!!

PoorUB

Wow! nothing like a 1 1/2 year bump!!
:wtf:
I am an adult?? When did that happen, and how do I make it stop?!

03hdfatboy


ΚĜΗΟŜΤ

2004 softail standard with some bling, currently stock but a 570 S&S cam 95 inch build is ready to go together.

New 95 " build!!
Forged HD SE pistons rings and pins
Jims Pro Lite adjustable push rods
Heads ported, Kibble-White valves, 4 way valve job, new springs 175 lb pressure.
Intake ported and matched
Trued, welded and plugged crank .001 runnout
570 S&S gear drive cams
New B lifters with S&S travel limiters
R&R billet cam plate
New '07 and newer oil pump
2 Lefty bearings, one for each side of course
B 148 cam bearings
DTT twin camm ignition TC88A
Screaming Eagle clutch pack
HB 125 primary chain adjuster
3.37:1 final drive ratio
VPC 83T

Due to Laconia bike week the build should take place one week after.


[attachment removed after 60 days by system]
Member since 2004

Bladesmith

Quote from: DblackmanC on November 02, 2008, 06:31:03 AM
2006 Dyna Anniversary
95" SE Flat Tops
.030 Cometic HG
SE 204 Cam
SE Air System
SERT


:agree:   Exact same mods on my'06 Deluxe [FLSTNI}
If my thought dreams could be seen they'd  put my head in a guillotine.. Dylan

Princess Butt

1997 Road King, 82,000 miles. Custom painted solid black, showing its age with a few stone chips. Mostly stock internals (Crane 300 cam and Jims lifters), stock airbox w/K&N filter, '07 RG mufflers with just enough bark to make me hear it, but it keeps the neighbors happy when I leave at 0430. I've had to replace rocker box gaskets twice. Original rocker box gaskets....what gives with that?

2006 Ultra, vivid black, 95 incher, SE 204 cams, SE breather with K&N filter, Kerker mufflers, 33,000 miles. Nothing like that Road Zepellin seat for long days.

1953 Panhead, stuffed into a 1978 frame, with a cast primary and a cowpie top transmission. It's sitting in the basement and I'm slowly gathering parts to turn it from an FX-styled bike to an FL again. Of course it's black.

Hey, I got a thing for fat forks and a 16 inch front wheel.

Shiny side up, rubber side down.

03hdfatboy

Here is mine after getting it back from Kendall Johnson Customs getting the engine rebuilt, new tranny and clutch..

J.E.T Heads W/ Jims's CR
Keith Black 10.5:1 pistons
HQ 0033-G
Power Comander III USB
Arlen Ness Bigsucker w/K&N
Bassani Road Rage
Darkhorse & Timkin
S&S Lifters
All Balls 1.4kw Starter
Baker OD6 "R" gears w/ N1 Shift
Barnett Scorpion


70weight

#137
'76 FLH. Been riding it for 17years.


Can't drink all day if ya don't start in the mornings.

CraigArizona85248

That bike is a real beauty 70! 

70weight

Wanna trade your pan for it? :teeth:
Can't drink all day if ya don't start in the mornings.

Baggerlady

2005 SEEG, 2003 FLHT, 1997 FLHT, and some times the 1999 FLHT.






Rest of the fleet as of 2004 that was pictured. Hubby rides the others.


CraigArizona85248

Quote from: 70weight on June 08, 2010, 11:22:36 AM
Wanna trade your pan for it? :teeth:

We should be neighbors and then we could swap depending on the mood of the day.   :hyst:

aquaman

#142
Currently riding a 1979 Honda CR250R Elsinore...
Diplomacy is the art of saying 'nice doggie' until you find a rock.
Will Rogers

Topend

My kids little red mini bike until I get my 99 FLHRP back together   :smiled: I am kinda getting used to the gas milage of the mini bike!
95 cu in, Andrews 37,  Supertrapp mufflers, 42mm Mikuni, SE/Heads, Crane 4HTC

El Camino - Brazil

2006 FXSTBi
103 crusher kit (domed heads)
CVO/Darkhorse crankshafts (trued, welded, balanced and lightned with holes and proedge)
WT TC46G camshafts
WT 57mm TB with WT injectors
S&S roller rocker arms with SE forged support
SE tappered Pushrods
SE timken conversion on the left side
Vance & Hines 2 into 1 competiton exhaust
Kuryakyn Hi-Five air cleaner
SERT
Primo V belt drive with Rivera clutch and VPC

Gabriel

[attachment removed after 60 days by system]