No spark on plug wire

[pearsonman1]

Well I've come a long way on this fire rebuild and still have a long way to go. Got and installed used wiring and ignition parts-coil,electronic ignition module on the 90 fltc now a flhs. Finally was able to hit the starter today and hear it rotate after four months. Sounds OK. Then I checked my plugs for ignition spark and there is none. I rechecked my wiring and it seems fine. I have voltage to both post of the coil. Would that mean that he module or module wiring is bad? The male end of the ICM is melted a bit,but I think it is making contact. Anyway to check at the timer pick up? Thanks for any help. Danny