Cycle Rama 575 + MCR heads + TTS Tune , In a 96"

[GeorgeW]

I have seen some good results on this and other sights using the CR575 Cam . My question is if you install the CR 575'S in a 96".. What would adding MCR heads do for this setup ,,Also would you need ACR's?

[George W]

Come on Guys Help me out ,, If it's a stupid question just say so ,, I'm trying to learn !!!

[R.Bingham]

I can't answer as far as the MCR heads. I would just get the stock heads ported by one of the excelent porters here on this site. A list of some of them can be found here:  http://harleytechtalk.com/htt/index.php/board,15.0.html
As far as compression releases go I would think they would be unnecessary in an otherwise stock motor as the CR 575 cam intake closing is 5* later than the stock cam so it should have slightly less compression. 

[PanHeadRed]

What would adding MCR heads do for this setup


Ping.

[happyman]

What would adding MCR heads do for this setup


Ping.

so why does MCR= Ping??

[Admiral Akbar]

76cc chambers (may be up to 80?), early intake close??

Max

[happyman]

76cc chambers (may be up to 80?), early intake close??

Max

had the heads confused.