Clutch spring retainer bolt torque

[rawshog]

99 FLHT.  Can't find the torque value.  Anybody know what it is?

[Pirsch Fire Wagon]

Not sure what your referring to exactly. But here is the Torque for everything in the Primary Case

Primary chain tensioner shoe nut 21-29 ft-lbs 29-39 N-m
Primary chain inspection cover screws 50-70 in-lbs 6-8 N-m
Clutch adjuster screw locknut 6-10 ft-lbs 8-14 Nm
Clutch inspection cover screws 7-9 ft-lbs 10-12 Nm
Clutch diaphragm spring retainer to clutch hub bolts 90-110 in-lbs 10.2-12.4 Nm
Rear wheel castle axle nut 60 ft-lbs 81 Nm
Rear swingarm pivot shaft locknut 40-45 ft-lbs 54-61 Nm
Passenger footboard bracket bolts 34-42 ft-lbs 46-57 Nm
Shock bottom mounting bolt 35-40 ft-lbs 47-54 Nm
Rear header pipe to crossover pipe TORCA clamp 45-60 ft-lbs 61-81 Nm
Exhaust pipe worm drive clamp screws 20-40 in-lbs 2.3-4.5 Nm
Mainshaft sprocket nut 50 ft-lbs, then 30° to 40° 68 Nm, then 30° to 40°
Mainshaft sprocket nut lockplate socket head screws 90-110 in-lbs 10-12 Nm
Rear wheel sprocket bolts 55-65 ft-lbs 75-88 Nm
Primary chaincase to crankcase and transmission 18-21 ft-lbs 24-28 Nm
Front and rear starter mounting screws 13-20 ft-lbs 18-27 N-m
Starter jackshaft bolt 7-9 ft-lbs 9-12 N-m
Engine compensating sprocket nut 150-165 ft-lbs 203-224 Nm
Clutch hub mainshaft nut 70-80 ft-lbs 95-108 Nm
Primary chaincase cover allen head socket screws 7-9 ft-lbs 9-12 N-m

[rawshog]

Clutch diaphragm spring retainer to clutch hub bolts 90-110 in-lbs 10.2-12.4 Nm

That was it.  Thanks much!  And Happy New Year!