8 G in a Roadking????

[BONERACIN]

Anyone tried running a 8 in a Roadking?  The build currently is 95/ 06 heads, 83cc's, woods springs/ Crane 300 cam/Cv carb/ DTT ignition.      The compliant is the bike weak in the higher RPMS, above 4000. I am not sure if the 8 will help the guy out just putting this out there for some suggestions. 

[Admiral Akbar]

Yep,  Worked way better than a WT26g.. You'll need to bump the CR to 10.5 to 10.8 to 1..  Max

[BONERACIN]

Thanks, Max.

[Admiral Akbar]

Been thinking about this, the WT26 would probably work OK also.. Bet the W8 would do better down low (for a high end cam). If your interested I got a set of W8Gs  I'll sell for $150 plus ship.. No gears..

Max

[1FSTRK]

Did it 2 seasons ago and would do it again in a heartbeat. As much down low as a mouse cam and pulls to 6000. 95" 8.4:1 no ping and no comp releases. Also have it in a 9.9:1 110 in a softail with the same results. Both sheet are in the dyno section