Rocker / Motor Mount Bolts

[fzee]

Looking for some Rocker / Motor Mount Bolts for a 1980 Iron Head.  They are 5/16" Fine thread into the head and a 5/16" coarse threaded stud on top to attache the Motor mount. Just need two!  Thanks!

[Lew]

Those are tough.  Here you go.  http://www.debrix.com/Top-Mount-Stud-1979-1985-Harley-XL-Sportster-p/37-0450-vt.htm

Looks like they are out of stock at debrix.  Try here.  http://www.vtwincatalog.com/dl/index.php?page=Catalog&dl_pg=896

In a pinch you can also use threaded rod cut to the right length with a flat washer and half nut for the rocker and a lock washer and full nut for the motor mount.

[garyajaz]

for the weird stuff i go to catapillar tractor parts dept.
even got hardened front motor mount bolts there.
(the long ones)
they have had everything i ever needed. 

[fzee]

Thanks for the info!!  As you may be able to tell because of my slow reply, this project has been happening for about 3 + years!!  I will check out both suggestions!  Thanks again!!