Manually disarming alarm....

[NETacomaFatboy]

I have a 2006 SE Fatboy and a 2010 RG.     Is manually disarming both of them the same.  And if so, what is the procedure...  Thanks.

[hdbikedoc]

must marry the two fobs to both bikes ,can be done on dt at dealer

[NETacomaFatboy]

no.  I am talking about manually disarming the alarm.  As in disarming the alarm without the FOB.   

[iconicbikesrider]

I have an '06 SE Fatboy and the FOB has to be used to disarm the system or if you want to do it "manually" you need to have the code. The code was assigned by you or perhaps still "Factory Default" Which in some cases is 1-2-3-4-5.
The sequence is:
Turn IGN key to IGNITION and immediately hold BOTH turn switches in until 5 dashes appear in odometer widow
Enter first digit of code by pressing left turn switch a number of times ( press it one time for # 1 or 2 times for # 2 and so on)
Press right turn switch 1 time
Enter second digit of code by pressing left turn switch X times (as you did with first code's number) Press right turn switch one time.
then repeat until you get all 5 code numbers.
If I am giving you the wrong info, sorry.

Good luck

[ViennaHog]

it is the same

[NETacomaFatboy]

ny ...thanks..

vienna..  thanks too.