Front Turn Signals

[conmag]

 Going from OEM on 2009 ultra to the bullet style front signals.Changed the rear ones tonight.Ordered the front ones.How much of a PIA is it changing the front ones?

[eglideic]

 It's easy.
Just unplug the passing lamp assembly and use a very small screwdriver to remove the turn signal wire connectors from the plastic plug end.
Your service manual will tell you how to do it.
Then remove the allen bolts holding the turn signals and pull the wires through the plastic conduit.
You might try to attach something to the wire end so you can pull the wires for the bullet lights back through.
I use upholstery thread. It's small and will not break.
Also some lube helps.
Then put everything back together.