finished up my deck height bridge.......

[rbabos]

I just found this one sold by Randy @ Hyperformance on E-Bay.
It will do pinion shaft run out, piston TDC check,  piston jet pop off pressure, inter connect leak down.
It lists for $110.00 and includes the dial indicator.
It looks like a nice multi-use piece to add to the tool box.
I'm going to buy some aluminum and try to machine one like this...I like a multi-use tool like this one.

[attach=0]

What does the hose on the left side do?

B motor specific. Interconnect check for counterbalancer oil circuit. Leakdown within spec. There is some natural leakage past the hydro tensioners but the main idea is to see if the seal between the cases is intact. % of leakage past the tensioners varifies it is.
Ron

[hrdtail78]

Thank you Ron.

[No Cents]

here you go FSG...the multi use tool being used.

[attach=0]

[attachment removed after 60 days by system]

[No Cents]

one more pic...by the way this crank had .004 run out.

[attach=0]

[attachment removed after 60 days by system]

[FSG]

   thanks