I'm here

[Lew]

I think...
Lew

[jerite]

I 'm here too........
Jer

[harpo1313]

here also

[easyricer]

OK I think I might be in.
EASY

[bob_e95482]

I'm here.

[mite5255]

me to i think

[76shuvlinoff]

Made it,
been a bumpy ride huh guys?  Even with that we are going to be better off in the long term.  Many thanks to the technophiles that pulled this off.   

Mark

[nuts4shovels]

I'm here--I think

[gator]

I'm here again. Shovelheads are the coolest.

[Ultrashovel]

I'm here.....love those Shovelheads!!!!

[HDdude5]

I think I made it.....not sure though.
79 FLH

[attachment removed after 60 days by system]

[randallwhitman]

I'm a little new to all this, but I guess I'm here.  Randy.....Miami

[saddle tramp]

Me and my 75 are still alive !

[rbonner]

Huh, interesting.  I suppose I'm here too.  BOB 

[8080FXS]

I'm here too. I think.Some people would argue that point!

[Old Iron]

ME TOO, I think

[Old Iron]

Yep, I'm here!  I just had to check and see if it really worked.  These computers are a bit un-nerving for an old guy like me.  But, now I'm here!

[BillJ]

I'm here because I'm not all there!  

[woofwoofbaby]

I'm here...   

[attachment removed after 60 days by system]

[shovelheadfreak]

think i am also.

[Podunker]

Just joined...

[81hogman]

Did I make it?

[81hogman]

SUCCESS!!!!!!

[China twin 88]

still working on the China 83  shovel and now the games are over ..maybe can get some parts in.....

[brubinfxr]

yup, hope to see some the familiar names

Brubin
82FXR

[hogtown]

i'm here i think

[Dennman]

Been lurkin out here for a while.Got lots of time on my hands now so will be around.

[kennny J]

 
My Dad used to say: My parents were WELLOFF and I'm just a LITTLEOFF !
First time I been kicked out of an MSN site.
But here I am I even brought the 78 FLH

[Dangit_Dave]

'Bout lost me on that last curve, but I cought up with the front of the pack again!

[nomadbkr]

 .. uhhh .. is dis where I waz goin ? .. lol
.. hello all ..
... nomad103 here .. the party can start now .. 
.. figured now was the time, so I changed my nic' to nomadbkr cuz I no longer run 103" ..
.. I'm likin the new an improved HTT .. thx mgr's !! ..
.. gonna take some learnin to figure it all out cuz I R not so quick on this darn puter ..
.. so I'll be postin on the old board for awhile still I guess ...
.. here or there, I'll be typin at y'all ..

  nomad

[attachment removed after 60 days by system]

[slowstroker]

Me too!

[72shovel]

Me too!  Me too!!  Me too!!!

[byob]

I'm here. Changed my login, too long to type. Was axbycz321. I wonder how many won't
bother to register over here.

This board allows post editing too.

[harpo1313]

cant imagine we will have the amount of folks we had before[close to 30000] as alot joined to ask a specific question or sell something,so i would think a thinning of the herd is a good thing, i hope alot that rejoin will use their old handle so we all dont have to so to speak start over.im curios as to how much action we will see on the v rod and buel boards as there wasnt a whole lot going on there before.

[76shuvlinoff]

   I hope we don't lose anyone.  I think some are hanging back to make sure this is the final landing zone.  It got a little confusing over the last few days, I bookmarked so much info I need to clean it all up now.

[Johnnyshvlhd]

I think I made it. This new site is really different

[flhswingarm]

Hello shovel heads

[who444444]

made it

[pappyfreebird]

i r here !!! or r i there ,,ok i shut up now ,,but i dint close the back door neither

[Steven]

I have a shovelhead s+s514 cam s+s e card 92 shovelhead motor with a evo oil system, delkron engine cases s+s five speed trans and the push rodes covers are not sealing in the front cycl. when the motor is running u can see the cover moving up and down in the front exah. side pleas help Thanks

[Lew]

Steven, sounds like the pushrod is rubbing inside the tube.  Pull it apart and have a look.  Might be a broken tube spring allowing things to rub and leak.
Lew

[Hazy]

Just sayin' hey. Lot's of buttons to play with and a speel sheker for Pappyfreebird

[nomadbkr]

I have a shovelhead s+s514 cam s+s e card 92 shovelhead motor with a evo oil system, delkron engine cases s+s five speed trans and the push rodes covers are not sealing in the front cycl. when the motor is running u can see the cover moving up and down in the front exah. side pleas help Thanks

.. steve .. I'm with Lewy on this one ..
.. sounds like the pushrod is making contact with the pushrod tube on the front exhaust ..
.. front exh. is always the worst for this cuz of the angle .. if you have the S&S pushrods, the cure I'm told is to shorten the small (upper) tube by about 1/4" .. the reason is cuz the "too big to clear" locking nuts on the phat pushrod is clipping the bottom of the upper tube .. shortening the upper tube enough to clear will depend on the cam lift you run, but 'bout 1/4" is a good starting point ..
.. you might get a good idea 'bout how much to remove by kicking the motor thru while holding JUST the upper pushrod tube in place by hand to see what it'll take to miss the nut when that valve cycles thru ..
.. removing the spark plugs will make that easier .. if you have no kicker, you can roll it thru with the rear wheel off the ground in gear ..

.. the idea is to shorten the top pushrod tube to make room so the locking nut misses when the pushrod is pushing up, but not to shorten the upper tube too much, to the point of making the tube assembly too weak to stay together good ..

.. good luck,
nomad

[dave_9113]

Junk site!

dave

[oldhippie765]

me too. been riden i think this is our indian summer here in in. 70's all this week    rex

[v10ole]

v10ole here, Hiiiiiiiiii.

[hotham]

Finally made it.  I think this will be great.  after I put in some time on this new site.

[Magical-1]

Another change!!!!  Heck we haven't even gotten past the one coming up in Tuesday!

[Ausgasman]

looks like a cool site.
Just have to find my way around.

[buzzurd]

TaaaaaaaDaaaaaaaaaa!!!!!!!!!!!

[Inda Win]

Cool!   

[hkd76]

I'm here too

[06ultra]

Hello, can anybody here me.

Got to say this shovel site kicks ass.

[Rumblefeesh]

Made it, but with a change of handle, used to be shovelsoft, now Rumblefeesh