March 28, 2024, 02:44:21 PM

News:


Belt adjustment

Started by tmwmoose, March 19, 2014, 06:29:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmwmoose

Hey guys , I have a 95 buell in the shop and need to adjust the belt could someone give me the spec's please and thanks!!

garyajaz

found some specs.
but which model/?  blast??

tmwmoose


garyajaz

hell, cant find site.  had a line drawing with all the stuff.

but anyway
the gist of it is

1.5-1.75 in. (38.1-44.5 mm) deflection with 10 lbs (4.5 kg of upward force)
applied to center of lower span. Measurement must be taken with rear suspension
fully unloaded. NOTE: The rear suspension is considered fully
unloaded when the motorcycle's weight is not compressing the rear shock. It
is not necessary to raise the rear wheel off the ground to reach this point.


oh also those couple years had a recall for broken swing arms.
here is link..
http://www.buellx1-li.ch/Buell%20Recall-Liste/Buell%20Service%20Bulletin%20B-25A%20-%20B025A-263572.pdf


tmwmoose

thanks Gary that will work !