News:


Main Menu

apes on a 2014 street glide

Started by roy95, September 16, 2014, 09:20:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

roy95

  want to put wild 1 ,,wo577 bars on my 2014 street glide they are 12.5 high 1.25  fat  is there room to make small adjustments on the pull back if needed or would they hit the gas tank,,,,and is there enough hose for clutch and brake line

amcmp

There is enough room for abou 3 to 4 inches of adjustment. Need 6 inch longer brake and clutch and extended throttle. you can get by with  stock length wires.
Good luck. Those are nice bars, very solid, with good size holes that have been chamfered for the wires. I would also recommend to put stiffer bushings.

tomcat64

Quote from: amcmp on September 16, 2014, 09:26:46 AM
There is enough room for abou 3 to 4 inches of adjustment. Need 6 inch longer brake and clutch and extended throttle. you can get by with  stock length wires.
Good luck. Those are nice bars, very solid, with good size holes that have been chamfered for the wires. I would also recommend to put stiffer bushings.

:agree:

76shuvlinoff

I put wo575s on my 12 Ultra, I assume they are shorter than the 577s above?  I had to monkey around rerouting the wiring in the batwing pretty well to get it reconnected. Then I routed the clutch cable between the tank and fairing. It would connect but it was tight as hell trying to go thru the fairing.

Mark
Critics are men who watch a battle from a high place, then come down and shoot the survivors.
 - Ernest Hemingway