ACR Heads to Manual CR Heads??

[djl]

Plug the ACR hole and put manual releases in. Harley sells the bolt to plug them. Put them in front of the plug like Kirby said earlier.

Thanks Larry; I like it.   Do you happen to know the PN for the bolt to plug them? Doesn't show up in any of the microfiches I have seen.

[FSG]

16648-08A   ASSY, PLUG & GASKET     MRRP 9.95   (Steel)

or

or  http://hammerperf.com/tctopend.shtml#acrplugs



http://harleytechtalk.com/htt/index.php/topic,74118.msg810311.html#msg810311

[djl]

16648-08A   ASSY, PLUG & GASKET     MRRP 9.95   (Steel)

or

or  http://hammerperf.com/tctopend.shtml#acrplugs



http://harleytechtalk.com/htt/index.php/topic,74118.msg810311.html#msg810311

Thanks FSG; I found the Hammer Performance plugs while you were typing. Billet aluminum and $20/each.  I snagged the ACR heads and will move on.

[joe_lyons]

I was wrong I guess its only for 176 cals.  But I'm pretty sure you could cram a 176 cal into the 05 if it had o2 sensors but otherwise it would throw a code.

[HD/Wrench]

Hell add the 02 sensors as well why not nice upgrade there too.. ha ha

[djl]

Hell add the 02 sensors as well why not nice upgrade there too.. ha ha

Steve,
That's way above my pay grade.   However, I was recently informed that the "green" wire referred to in previous posts is accessible under the seat . So I don't  have to futz around under the oil tank; terminal 87 is it?  Anyway, I scored the ACR heads and have several options to use them, so the thread has a happy ending.

[Soft 02]

Gotta love happy endings. Let us know how it goes.

[HD/Wrench]

I tried to load the PDF but its too large even for my photo bucket Send me a email I will forward the file on the ACR step by step 

steve@gmrperformance.com

[IronMike113]

Plug the ACR hole and put manual releases in. Harley sells the bolt to plug them.
Put them in front of the plug like Kirby said earlier.

I like this answer,KISS