Where can I buy this? (look at the pics)

[nwrvman]

Can somebody direct me where i can buy this?!
I'm looking for the end cap trim piece either polished or black oxide finish of a Screaming eagle 2:1, made by Kerker or Supertrapp
I got on Supertrapps website and its not very helpfull, it sux.
I have the 4" disks and the Stainless Steel end cone, I just need the trim that covers part of the cone, jsut like in the pix.
Hope the pix attached as I intended.
Thanks
J.C.

[FXDBI]

http://www.summitracing.com/int/search/brand/supertrapp?GroupBy=ProductName

[nwrvman]

where is the item?
I saw many many sites with Supertapp or Kerker products, but NONE cary that very end cap
J.C.

[chico]

call supertrapp directly and speak to schultz, i forget if his first name is bob or bruce, i think its bruce, he will get you what you need.

[q1svt]

on page 2, from the summit link...

[FXDBI]

http://www.summitracing.com/int/parts/sup-405-2120/overview/

It looks like what they call a heat shield. This one isn't chromed its stainless.  Bob

[nwrvman]

FXDBI
Thanks for trying to help, IT IS NOT the same thing, look again.
The Item you refering to its off-set, one side is longer than the other.
I am trying to get hold of somebody at Supertrapp, their website sux and trying to reach customer service by phone
its like calling a goverment agency, they never answer, sends you stright to an answering machine.

[whetsel.m]

Post when you find it

[nwrvman]

It simply amazes me how difficult it is to find such a simple thing
I'm tempted to borrow one from my friends bike and have one reversed engineered and machined out of billet Aluminum.
For the last week I been trying to find this damn trim and also I keep calling Supertrapps customer service to no avail.

J.C.

[chico]

I got to him by email, im at work now but will get his email and post it up for you. He responds fairly quick.

[hrdtail78]

Pollished Aluminum...P/N 036-2600
Black..................... 402-2602

[nwrvman]

Thanks for the efort hrdtail78
i went on suppertrapp's website
entered both of those numbers...NOTHING
I then Googled both numbers...well see for yourself its going bezurk, lists all the phone numbers in the worlds
and nothing about endcaps.
I'm so frustrurated!

[gryphon]

I'm surprised they haven't gotten back to you. i left a message and they got back to me almost immediately.

[nwrvman]

I Finally got hold of Steve there at Supertrapp.
hrdtail78 you were correct, those are real part numbers of theirs.
However, Supertrapp does not sell those caps in their catalogs
According to Steve its sold as part of the system.
If you want one you call them and they will sell it separate.
So...as hrdtail78 mentioned,
Black..................... 402-2602 @ $37.50 each
Thanks all for your help! 

J.C.

[hrdtail78]

Call up supertrapp and give them the number. It's like $38.  I got those numbers from them.   I don't think it is sold out of the catalog but it does come with the "Imposter" exhaust and some of the super megs.

I can get it for you, but you are going to pay to ship to me and then to you, and you will pay more for shipping than the part itself.   Let me know.

Hope the above is taken as intended and not as me pushing my shop.  There is a $10 margin on the part and I already passed that with time.

[nwrvman]

Thanks again hrdtail78 for your help, your information was correct.
I called Steve at Supertrapp and ordered it.
You saved me lots of frustration.
J.C.

[lilchief]

I'm surprised they haven't gotten back to you. i left a message and they got back to me almost immediately.

I agree with Gryphon but I see that you got ahold of S/T which is great! I was just going to add that I had to call them a few times to order parts for a used supermeg that I have and never had a problem reaching them.

Lil Chief

[Rags722]

Know it's a little late, but once you have the number, I did a search on Supertrapp P/N 036-2600 and it look like BSCHULTZ answered this on another forum 4 years ago...
http://forums.supertrapp.com/archive/index.php/t-1400.html

[hrdtail78]

I found that same forum after he gave me the part number.  My post is actually a cut and paste from that forum.