Phase 7 headlight

[BFC]

Does anyone know if you have to have a different mounting other than the factory one when using this headlight? My buddy has the Harley brand daymaker and his came with a new mounting ring with springs attached to it like little shock absorbers.. I searched but couldn't find my answer.. Thanks

[Blackbike]

This is what Truck-Lite has to say about fitment...

"Truck-Lite's 7" round LED headlamp, 27270C, is a drop-in replacement for #6014, 6015, 6016, H6024 and Par 56 lamp systems, utilizing standard H4 3 blade connector."

Best Wishes: Mike

[BFC]

@Blackbike... Thanks for the reply so I assume my 2007 Street glide has one of the part numbers you listed?? Wonder why Harley has a different spring loaded mounting ring with their kit..??

[MBrown]

I have the trucklite phase 7 on my 2007 Street glide. It's a direct bolt in but it protrudes out the factory trim ring more than the oem light. A frenched or similar style trim ring makes it look better imo.

[BFC]

Thanks guys for the help I think I'll try the Truck lite..  Harley Davidson dealer said I can get the spring loaded mounting bracket for $50 but doesn't sound like I need it..

[86fxwg]

Just installed the cyron LED bulb in place of my truck light 7 bulb. The cyron has more of a round bean than flat beam like the truck light. I real dont see any diffrence in the brightness.Truck light seamed to raise off the road opposite the turn.

86

[BFC]

Wonder why the Harley daymaker comes with a new mounting ring?

[carolinayarddog]

Just installed the cyron LED bulb in place of my truck light 7 bulb. The cyron has more of a round bean than flat beam like the truck light. I real dont see any diffrence in the brightness.Truck light seamed to raise off the road opposite the turn.

Just looked them up; seems a lot more cost effective; also looks like they offer bulbs for the spots; may be going this direction

Yarddog

[BFC]

I just tried to install my new Truck lite led on my 07 street glide and it just slips right through the chrome trim ring and won't stay in... The old factory light has 3 screws that hold it in the bucket.. The Truck lite just has a couple of small taps that go into some  indentions in bucket... Am I missing something or doing something wrong.. Supposed to be a direct replacement.. Any help would be great. Thanks

[BFC]

I have the trucklite phase 7 on my 2007 Street glide. It's a direct bolt in but it protrudes out the factory trim ring more than the oem light. A frenched or similar style trim ring makes it look better imo.

I can't get my new led headlight to stay in the factory trim ring  the headlight the light just slips right through it.. Any ideas?? Did you have any issues?? Thanks

[crazy joe]

Do this bulbs (cyron LED bulb) have a fan built
into them to keep the bulb cool?

[IronMike113]

I have the trucklite phase 7 on my 2007 Street glide. It's a direct bolt in but it protrudes out the factory trim ring more than the oem light. A frenched or similar style trim ring makes it look better imo.

I can't get my new led headlight to stay in the factory trim ring  the headlight the light just slips right through it.. Any ideas?? Did you have any issues?? Thanks

I have them in a 06,08,09 baggers with no problem did you measure it to make sure you have the 7" truck lite,they should work,I didn't change anything......... 

[BFC]

When I typed in my info for my bike on amazon it said it was a match for my bike part #27270c.. I'm at a lose too..

[BFC]

I have the trucklite phase 7 on my 2007 Street glide. It's a direct bolt in but it protrudes out the factory trim ring more than the oem light. A frenched or similar style trim ring makes it look better imo.

I can't get my new led headlight to stay in the factory trim ring  the headlight the light just slips right through it.. Any ideas?? Did you have any issues?? Thanks

I have them in a 06,08,09 baggers with no problem did you measure it to make sure you have the 7" truck lite,they should work,I didn't change anything......... 

I typed in the info on amazon and it was a match

[Just Nick]

 Post some pictures of it with out the trim ring it sounds like you are missing the retainer that the three screws hold to the bucket . The trim ring is not designed to hold the head light in you need to secure it with the bracket and three screws then install the trim ring

[BFC]

Post some pictures of it with out the trim ring it sounds like you are missing the retainer that the three screws hold to the bucket . The trim ring is not designed to hold the head light in you need to secure it with the bracket and three screws then install the trim ring

Sounds like I have the wrong light then Nick cause I have nine of that

[BFC]

Post some pictures of it with out the trim ring it sounds like you are missing the retainer that the three screws hold to the bucket . The trim ring is not designed to hold the head light in you need to secure it with the bracket and three screws then install the trim ring

Sounds like I have the wrong light then Nick cause I have nine of that

[BFC]

Post some pictures of it with out the trim ring it sounds like you are missing the retainer that the three screws hold to the bucket . The trim ring is not designed to hold the head light in you need to secure it with the bracket and three screws then install the trim ring

Sounds like I have the wrong light then Nick cause I have nine of that

[Just Nick]

It is stock on the bike the mounting bracket holds the oem headlight assembly in place then the trim ring goes over it. All you had to do was remove the trim ring then remove the three screws the hold the bracket (might not be the correct term) ring the remove the stock head light assembly unplug wire on out , plug wire into phase 7 put 7 in place put bracket ring back over new headlight install three screws install trim rings making sure to get spring clip on top the one screw in bottom and go ride


I think you took the entire head light mount out of the fairing the only thing you should have out of the bike is the glass headlight assembly all the metal stuff stays in the bike to hold the new phase 7 in place just like it held the stock headlight post a picture of the stock head light you took out

[Just Nick]

Post some pictures of it with out the trim ring it sounds like you are missing the retainer that the three screws hold to the bucket . The trim ring is not designed to hold the head light in you need to secure it with the bracket and three screws then install the trim ring

Sounds like I have the wrong light then Nick cause I have nine of that

That's all you need the rest of the brackets that hold that phase seven in place are part of the bike from the factory so if your headlight was installed securely before you started the new one will also be secure

[Just Nick]

Sending you a pm right now with my cell number

[BFC]

It is stock on the bike the mounting bracket holds the oem headlight assembly in place then the trim ring goes over it. All you had to do was remove the trim ring then remove the three screws the hold the bracket (might not be the correct term) ring the remove the stock head light assembly unplug wire on out , plug wire into phase 7 put 7 in place put bracket ring back over new headlight install three screws install trim rings making sure to get spring clip on top the one screw in bottom and go ride


I think you took the entire head light mount out of the fairing the only thing you should have out of the bike is the glass headlight assembly all the metal stuff stays in the bike to hold the new phase 7 in place just like it held the stock headlight post a picture of the stock head light you took out

That's all I took out was the 3 screws and the OEM headlight I left everything else in there... The new light doesn't have the 3 screw holes..

[Just Nick]

Number 17 will pop off the old headlight and you need that to install the new head light. [attach=0]

[glens]

All you're changing out is the group labeled 24/28 in the diagram above.

Damn!  Looks like that thing's bigger than a trash can lid laying on the floor in front of your feet!  I don't think it's the right part...

[BFC]

I got it in guys thanks