Factory X M module install

[ppotts1]

I just got a factory X M module for the HD radio in my 2013 Ultra Classic I know the wiring is there in the original harness I have the CB module installed. I can't find the XM plug to go into the mod. I don't want to start cutting wire ties to look for it. Does any one know where it is tucked away? I have been looking for a plug with a dummy plug in one end. Its in the wiring diagram in the book plug #185B.

thanks Phil

[UltraNutZ]

you need the Non-Ultra Overlay Harness in addition to just the XM module.

[Coyote]

Actually HD has a new harness now that is just for adding the XM module. Much less money than the ultra overlay harness. It's in the P&A catalog

[Coyote]

Here is the part.

[UltraNutZ]

well that sure in the hell simplifies things Coyote and much cheaper than the NUOH!

[ppotts1]

 I got it figured out. I have the over lay harness about six plugs, only three are used. One plugged into the CB one plug into the org. harness (CB plug) and one in the XM mod. All works great. Harley does not make the over lay harness anymore' The new one is a Y harness p/n 70172-06 about $50.
This will only work on 2008-2013 after 2013 everything has changed.
Thanks for your inputs
  Ohil