News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Main Menu

T-man 662-3 cams advanced 4

Started by Tattoo, February 16, 2016, 10:08:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Tattoo

February 16, 2016, 10:08:15 AM
Thinking of trying a 4 degree advance on the T-man 662-3 cams ,the TDC is .233 straight up. any idea what the TDC lift would be with the advanced 4 ?
"You can have anything you want
But you better not take it from me"

04 SE Deuce

#1
February 16, 2016, 12:56:01 PM
I'll guest about .265"...bet that's pretty close.

joe_lyons

#2
February 16, 2016, 12:57:40 PM
That would probably be best answered by the guys at tman.  Unless some one here has rolled their cams.
Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901

Matt C

#3
February 16, 2016, 01:30:40 PM
Slap a degree wheel and a dial indicator on there.

strokerjlk

#4
February 16, 2016, 01:57:20 PM
.270
A scientific theory summarizes a hypothesis
repeated testing establishes theory

BVHOG

#5
February 16, 2016, 02:10:37 PM
Unless you actually measure it you will have no way of knowing as the profile shape will dictate the actual tdc once the cam timing is changed. Let's just say you better be damn careful about valve clearance
If you don't have a sense of humor you probably have no sense at all.

strokerjlk

#6
February 16, 2016, 04:55:22 PM
Plan for .275 . end up at .270
A scientific theory summarizes a hypothesis
repeated testing establishes theory

04 SE Deuce

#7
February 16, 2016, 09:30:56 PM
Wes,  if you decide to run it let us know what you measure.

Tattoo

#8
February 17, 2016, 03:22:11 AM
Quote from: 04 SE DEUCE on February 16, 2016, 09:30:56 PM
Wes,  if you decide to run it let us know what you measure.

Sure will ,thanks again...
"You can have anything you want
But you better not take it from me"
Print
Go Up Pages1
User actions