Floorboard vibes at 27-3100 rpms...?

[IanSG]

had this before the wheels.

[IanSG]

This is where I think I'm at right now: (hope it's OK to link other forums)

http://www.roadglide.org/26-engine-related/322234-2013-motor-mount-alignment.html

Another forum member posted about this on this forum:
http://www.v-twinforum.com/forums/harley-davidson-touring/506138-2009-2016-right-front-motor-mount-alignment-poll.html

[ViseGrips]

 ..part #16207-9 .. it looks like you have wear from the pics with only 11K ...but why is the next question...perhaps poor OEM material..or alignment problem from another area..

[IanSG]

Question is replace with OEM or spend the 500 on the complete glide-pro set.

[topcat3815]

I tried just the glide pro front mounts on my 2014 limited, I didnt like the way they felt so I installed a set of new front mounts. I ws told by Jake at glide pro that they need some mile on them t settle in. Guess I didnt give them enough time

[IanSG]

I tried just the glide pro front mounts on my 2014 limited, I didnt like the way they felt so I installed a set of new front mounts. I ws told by Jake at glide pro that they need some mile on them t settle in. Guess I didnt give them enough time

Why'd you end up replacing your mounts?  And what was the difference in feel compared to OEM?

[topcat3815]

The reason i went with new front mounts after removing the glide pro mounts I thought  might as well as put in new stock mounts since I had it that far apart.  Im going to talk to jake about his mounts and get his opinion about break in.

[IanSG]

The reason i went with new front mounts after removing the glide pro mounts I thought  might as well as put in new stock mounts since I had it that far apart.  Im going to talk to jake about his mounts and get his opinion about break in.

I meant was there a issue you were having and thats why you replaced the mounts, or you just were doing engine working and figured you would replace the mounts too?

[FloridaJim5]

I have very similar issues with my 2013 Ultra.

Did we decide that the right front mount that's pulled to the rear is causing the vibration?   If so, what's the solution?

[topcat3815]

I have some floorboard vibration not all that bad but I was trying them to see if they helped . They didnt hope this helps

[IanSG]

Did we decide that the right front mount that's pulled to the rear is causing the vibration?   If so, what's the solution?

This is from the 2013 Service Manual (2013 Touring Service: Maintenance 1-61).. see #10, and 11