Cyco TC exhaust gaskets

[azlou66]

I just got a top end gasket kit from Cyco, the exhaust gaskets are a different design then I have used in the past. I'm wondering if they are worth trying??
Any one have experience with them good bad or indifferent?

[TMMWORKS]

Your comment was 2 weeks ago , I use drag part 0934-1237 never had a problem , not a fan of the mesh gasket.

[Don D]

Lou, The part you have are Cometic C9540 Race gaskets. They work quite well and do not intrude in the port.
I sub those in the top end kits when sold with our Pro Street heads

[Y2KRKNG]

This post deserves an update. I got that top end gasket kits and those gaskets. They're a flat mesh style(like the SE ones, I believe) They leak! Like blown HG type of leak! The tech at Cyco told me the kits don't come with the good one and that I needed to buy their tapered carbon impregnated ones I've never had a ext gasket leak this bad! Sure most the HP ones leak a bit and you can see evidence of that around the flange but these are a diff story.

[TMMWORKS]

I still and only use 0934-1237  drag # , believe those to cometic . They work great . They did make a change to exhaust gasket for the better . So its up to you.

[Wicked]

I still and only use 0934-1237  drag # , believe those to cometic .

Yes they are. Cometics # C9540.

[joe_lyons]

What exhaust do you have?

[Y2KRKNG]

I have a TH 2-1 and I have to admit that the split flange retainer was dish shaped. I used tapered ones and all good now.

[a2wheeler]

I tried those from my Cyco top end kit, and they leaked. I went down to get a set of SE gasket from HD and they told me the regular ones they sell now are the same as the SE. Therefore they are a little cheaper.