I want a loud mini air horn, what is everyone running?

[harley_cruiser]

I am looking at the Steel Nautical, it seems to have a good track record, nice and loud.
What does everyone like?

[jbexeter]

I have no practical helpful answer, I stick with Vance and Hines for audible alerts, but this might do the job...

https://youtu.be/cnr6uGIV8no

[Tommy D]

Mini beast has always been a performer,,, I'm surprised the Mo Co didn't introduce a four note on the Rushmore back in '14 MY

[harley_cruiser]

I have no practical helpful answer, I stick with Vance and Hines for audible alerts, but this might do the job...

https://youtu.be/cnr6uGIV8no

Love it, no helmet, no light, but a big horn.
I need it more for deer, turkey, and buzzards. I use the pipes and it works pretty well, but want to give them a startle.

[harley_cruiser]

Mini beast has always been a performer,,, I'm surprised the Mo Co didn't introduce a four note on the Rushmore back in '14 MY

I saw those, I want something that can be taken apart, the compressor under the cow bell, the horn in front.
I believe the moco sells a upgrade air horn?

[Tsani]

What I run:

[Snowyone]

I've used Howards Horns for years with good results.  Had to get a bit creative on mounting when I went from a Road Glide to a Fatboy low and moved the coil to the center motor mount.  It gets attention.

[moscooter]

 
Not necessarily "mini",  but this one will definutely (startle.)


https://www.youtube.com/watch?v=pTRYm_peqGA

[moose]

I have a wolo horn and am very pleased at the volume  sounds like an old time caddy coming through

[harley_cruiser]

What I run:

Now that looks loud:-) I like that.
Not sure it matches my bikes style.

[harley_cruiser]

I have a wolo horn and am very pleased at the volume  sounds like an old time caddy coming through

How did you mount it?

[koko3052]

I have no practical helpful answer, I stick with Vance and Hines for audible alerts, but this might do the job...

https://youtu.be/cnr6uGIV8no

Patent Pending???
I love it!

[koko3052]

I have no practical helpful answer, I stick with Vance and Hines for audible alerts, but this might do the job...

https://youtu.be/cnr6uGIV8no

That would definitely get the attention of those grannies putting the squeeze on you!

[Tripvalve]

http://www.howardshorns.com

[truck]

http://www.howardshorns.com

That high pitch squeal is annoying, sounds like Reba McEntire on steroids.

[harley_cruiser]

http://www.howardshorns.com

That high pitch squeal is annoying, sounds like Reba McEntire on steroids.

That is the intention ;-)

[Bladesmith]

Mini beast has always been a performer,,, I'm surprised the Mo Co didn't introduce a four note on the Rushmore back in '14 MY

I bought a Mini Beast AIR HORN.....turns out it consisted of two electric horns..NOT air horns

[Jaycee1964]

WOLO bad boy is very loud

[harley_cruiser]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

[Jaycee1964]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

That's a WOLO knock off!  LOL  Heck the Chiwaneeze will reverse engineer anything! 
http://www.amazon.com/Wolo-419-Bad-Boy-Horn/dp/B000F5DQWY

[76shuvlinoff]

When I had the engine guard on the shovel I hung an air horn on it. Right now I don't recall if it was a Stebel or a Wolo.
After I stripped some of the weight off the bike I just put a fairly loud (better than stock anyhow) all electric unit inside the nacelle.

[Eglider05]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

Yep, that's the one I have. I separated it and stuffed the horn under the stock cover. I mounted the compressor on the large flat area of the frame right behind the rear cylinder. I have HD mid frame covers so it's well hidden on my bike. It does the job.

Rick

[harley_cruiser]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

That's a WOLO knock off!  LOL  Heck the Chiwaneeze will reverse engineer anything! 
http://www.amazon.com/Wolo-419-Bad-Boy-Horn/dp/B000F5DQWY

In that link under more information it says the solo is Chinese.
The Stebel is Italian, although not sure where it is made.

[Jaycee1964]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

That's a WOLO knock off!  LOL  Heck the Chiwaneeze will reverse engineer anything! 
http://www.amazon.com/Wolo-419-Bad-Boy-Horn/dp/B000F5DQWY

In that link under more information it says the solo is Chinese.
The Stebel is Italian, although not sure where it is made.

Your right!  The WOLO is Chinese.  Hmm... I always thought they were US based.  The WOLO has been around 4 years.  The uncanny resemblance between the 2 leads me to believe they could be made by the same manufacturer.  Great, LOUD horns they are

[FLH_Rider]

Well I went ahead and bought a Stebel Nautilus on eBay.
http://pages.ebay.com/motors/link/?nav=item.view&id=272113242906&alt=web
You are supposed to be able to take them apart to mount in separate locations, so will let everyone know how it works.
Thanks for the input, HC

Yep, that's the one I have. I separated it and stuffed the horn under the stock cover. I mounted the compressor on the large flat area of the frame right behind the rear cylinder. I have HD mid frame covers so it's well hidden on my bike. It does the job.

Rick

I did the same thing, only thing i did different was I stuffed the compressor behind the left side cover between the the battery and the brace holding the fuses, it's just zip tied in place, been there over 10 years,  back in the original site someone had a pictorial on installing it

Sent from my SM-T237P using Tapatalk