Tire balancers, and motorcycle adapters???

[Nebraskarider1]

 Bottom line question is a 14mm shaft gonna be ok for rear wheels/tires off baggers? Gonna cost me about 3x as much for the 19mm shaft kit for the balancer.

[Prostock]

Yes, I have used the K@L 14mm for the last 2 years with no issues.  Takes more time but you can achieve a "spot on" balance using this simple set up.   

[Nebraskarider1]

Does that use the tire clamp? The cheaper one I was looking at used a couple pins for spoke drive, shouldn't be an issue for me anyway since there aren't too many solid wheels around.

[Prostock]

What balancer are you looking into.  I use the simple stand and let gravity tell me what to do.

[Nebraskarider1]

I already have an electronic spin balancer, so the shaft is only supported on the one end that is screwed into the machine. If I was going to get a simple stand I was going to get the marcparnes.
But I bought and sold some tire machines and have no money in my spin balancer so I want to use it. So here are my choices:

http://www.ebay.com/itm/Motorcycle-adapter-for-Wheel-Balancer/181923757574?_trksid=p2060778.c100290.m3507&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D40954%26meid%3Dd183cb3c519a4ebbb27c62578c5d7695%26pid%3D100290%26rk%3D3%26rkt%3D4%26sd%3D191735101343

or

http://www.ebay.com/itm/NEW-Kernel-Wheel-Balancer-Standard-Tire-Tread-Clamp-Bike-Motorcycle-Adapter-Kit-/251901035226?hash=item3aa678c2da:g:zcYAAOSw-7RVHDFk&item=251901035226&vxp=mtr

[Nebraskarider1]

Anyone else using a spin balancer?