May 09, 2024, 02:50:54 PM

News:


New KB Pistons

Started by Don D, April 11, 2017, 05:37:06 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

1FSTRK

So now that we are switching heads, what are the sizes on the Manley valve heads and what do they flow?

Also, why is a 280 cfm head too small for a 110 drop in kit?
"Never hang on to a mistake just because you spent time or money making it."

Fisherking

Quote from: 1FSTRK on April 13, 2017, 01:26:24 PM
Quote from: MCE on April 13, 2017, 07:13:45 AM
My findings on Raised runner is, you don't need to with a 1.9 valve. I can get mid 280s @28" without raising the port
roof on a 1.9 valve. (I'm getting 280 with John's 1.875 valve and leaving the guides in the head)

Do you have any dyno sheets from engines with this head?

Sorry the intake valves are only 1.85

F.K.

1FSTRK

Quote from: Fisherking on April 18, 2017, 05:48:45 AM
Quote from: 1FSTRK on April 13, 2017, 01:26:24 PM
Quote from: MCE on April 13, 2017, 07:13:45 AM
My findings on Raised runner is, you don't need to with a 1.9 valve. I can get mid 280s @28" without raising the port
roof on a 1.9 valve. (I'm getting 280 with John's 1.875 valve and leaving the guides in the head)

Do you have any dyno sheets from engines with this head?

Sorry the intake valves are only 1.85

F.K.

Noted, just makes the great flow numbers that much more incredible.
I would ike to see them on a 107 or 110ci.
"Never hang on to a mistake just because you spent time or money making it."

1FSTRK

Quote from: 1FSTRK on April 15, 2017, 06:01:56 PM
Quote from: MCE on April 15, 2017, 04:26:55 PM
Two different animals.

We haven't dynoed these 1.875 heads yet, they're for smaller motors (Just have flow numbers right
now). I'll have dyno information on these small valve heads soon, but they're going to be real close
performance wise.

(Smarty's 103 heads have Manleys in them)

:wtf:

Quote from: MCE on April 13, 2017, 01:42:09 PM
Quote from: 1FSTRK on April 13, 2017, 01:26:24 PM
Quote from: MCE on April 13, 2017, 07:13:45 AM
My findings on Raised runner is, you don't need to with a 1.9 valve. I can get mid 280s @28" without raising the port
roof on a 1.9 valve. (I'm getting 280 with John's 1.875 valve and leaving the guides in the head)

Do you have any dyno sheets from engines with this head?
I do

Any word on the dyno for these heads?
"Never hang on to a mistake just because you spent time or money making it."

Barrett

I guess I got off topic in my deleted post asking about the pistons..  :scratch:

Don D

All I wanted to see was a listing of the new KB offerings  :scratch: :nix:

1FSTRK

WFOLarry is one of our HTT vendors is a distributor and can get you any info or parts you want.
http://www.harleytechtalk.com/htt/index.php?topic=89012.msg1018263#msg1018263
"Never hang on to a mistake just because you spent time or money making it."

K4FXD

So I guess these heads only flow these numbers with the KB pistons? :scratch:
I prefer dangerous freedom to peaceful slavery

BVHOG

Quote from: HD Street Performance on April 30, 2017, 08:35:44 AM
All I wanted to see was a listing of the new KB offerings  :scratch: :nix:
If you put these under your heads they will make great power
If you don't have a sense of humor you probably have no sense at all.