Print Page - 30T swingarm mod?

Title: 30T swingarm mod?
Post by: harpwrench on January 05, 2020, 07:20:57 PM

If the axle slot is lengthened to run the stock belt with a 30t pulley on a touring model, is it necessary to gusset the end of the swingarm or not?

Title: Re: 30T swingarm mod?
Post by: jsachs1 on January 06, 2020, 03:06:56 PM

If you're a member on Eagle Riders CVO forum, go to "30T pulley with stock belt. 10 -7- 11", and you'll find the mod IMO, you need to do. Also, on the same forum "Gussets for swing arm. 7 - 17- 12."
John

Title: Re: 30T swingarm mod?
Post by: harpwrench on January 06, 2020, 07:45:46 PM

Thanks :chop:

Title: Re: 30T swingarm mod?
Post by: Tail Ridr on January 07, 2020, 03:16:16 AM

Is this the one...?

https://www.cvoharley.com/smf/index.php?topic=67516.0

Title: Re: 30T swingarm mod?
Post by: jsachs1 on January 07, 2020, 02:55:32 PM

Quote from: Tail Ridr on January 07, 2020, 03:16:16 AM
Is this the one...?

https://www.cvoharley.com/smf/index.php?topic=67516.0

Yes.

HarleyTechTalk

Technical Forums => General => Topic started by: harpwrench on January 05, 2020, 07:20:57 PM