Print Page - New member from South Australia

Title: New member from South Australia
Post by: MortGarson on December 28, 2018, 03:41:31 PM

Hi readers.
I bought a 1990 FLHS that was a high mileage sh*tbox. Rusted frame (covered up with silicone and bog) non existent primary adjuster shoe plastic, no Primary oil (thats why it didn't leak) broken final drive teeth, plus heaps of other issues. My fault for believing a salesman, and not giving the bike a thorough inspection. Anyway I chose to keep it and fix it up. A harley forum in Australia mentioned this site as a wealth of information. Anyway a thorough top end rebuild is on its way (it used nearly three litres of oil on a 2200km run through Victoria) and I know I will need as much advice as I can find.
Cheers Glenn

Title: Re: New member from South Australia
Post by: SixShooter14 on December 28, 2018, 04:09:47 PM

Howdy Glenn, welcome from Arkansas, USA.

You have found the right place. There is a lot of great info. in the General and EVO tech. sections. And if you can't find what you need, just ask.

Title: Re: New member from South Australia
Post by: harttoo on December 29, 2018, 06:22:37 AM

Welcome from Wisconsin.

Title: Re: New member from South Australia
Post by: jls 64 on December 29, 2018, 08:00:15 AM

Welcome from central py.

Title: Re: New member from South Australia
Post by: moose on December 29, 2018, 08:24:45 AM

welcome from New Jersey

Title: Re: New member from South Australia
Post by: Leed on December 29, 2018, 12:14:55 PM

Welcome from Texas USA

HarleyTechTalk

Social and Events => The Welcome Forum (Contact Us) => Topic started by: MortGarson on December 28, 2018, 03:41:31 PM