Print Page - PV ACR enable

Title: PV ACR enable
Post by: Jim Bronson on June 17, 2022, 11:48:26 AM

I recently had a BB kit installed on my 2013 Dyna. I noticed in the PV config tab there is a check box for ACRs. It was unchecked. Is this the equivalent of having ACRs enabled by the dealer software, or do I need to do both? In other words do I need the dealer to enable them AND check the PV ACR box?
Thanks.

Title: Re: PV ACR enable
Post by: Ohio HD on June 17, 2022, 11:58:18 AM

If a bike has ACR's the PV will turn them off or on. Dealer not needed.

Title: Re: PV ACR enable
Post by: Jim Bronson on June 17, 2022, 12:50:46 PM

Quote from: Ohio HD on June 17, 2022, 11:58:18 AMIf a bike has ACR's the PV will turn them off or on. Dealer not needed.

Even if they weren't stock but were added and connected during upgrades?

Title: Re: PV ACR enable
Post by: Jim Bronson on June 17, 2022, 01:26:15 PM

Never mind. I just tried it, and they work. You saved me an hour of shop time. Thanks! :beer:

HarleyTechTalk

Dyno & Tuning Zone => AFR & Tuning Zone => Topic started by: Jim Bronson on June 17, 2022, 11:48:26 AM