HarleyTechTalk

Vendors That Support This Site => Rockout Rocker Products => Topic started by: Ohio HD on July 02, 2017, 06:45:03 PM

Title: Inserts for Vulcan Works Billet Rocker Supports
Post by: Ohio HD on July 02, 2017, 06:45:03 PM
About a year ago or so I asked John about Rockout Inserts for Twin Cam using Vulcan billet rocker arm supports. He asked me for some dimensions on the rocker supports, and then made me a set. I'm just now getting that motor together, a 124 inch. They slid in really easy and smooth, and when I installed the Vulcan rocker supports on the head, there is zero play anywhere. I'm sure this will make the top end tap non existent.

Thanks John   :up:


[attach=0]

[attach=1]
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Ohio HD on July 02, 2017, 06:45:43 PM
[attach=0]

[attach=1]
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Rockout Rocker Products on July 02, 2017, 06:57:57 PM
JEEZUS.... Rocker porn lol!

That's great to hear brother, thanks for working with me on this.

Looking forward to seeing more about your build  :up:

John @ Rockout
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Ohio HD on July 02, 2017, 07:04:40 PM
Thank you John, not many companies will make a part for an application they have not supplied in the past. As I mentioned above, they slid home with ease, but then at the end they pressed in snug.
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Ohio HD on November 18, 2017, 09:43:50 AM
Just a followup. After having ridden the bike, the valve train does not have the Twin Cam tick tick that many of them have. The Rockout inserts do make a difference.
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Frédéric CM on November 18, 2017, 10:46:55 AM
Looks real nice !
By curiosity, do you know the size of the drain holes ?
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Ohio HD on November 18, 2017, 10:49:31 AM
They're 0.125", because I drilled them that size.
Title: Re: Inserts for Vulcan Works Billet Rocker Supports
Post by: Frédéric CM on November 18, 2017, 01:54:29 PM
Okay thx ;)
I Wonder why they make them smaller (as do oem)