HarleyTechTalk

Quote from: Sunny Jim on April 30, 2024, 06:50:00 AM

Quote from: Hossamania on April 30, 2024, 05:33:07 AMI can only imagine. Are higher costs mostly due to shipping or tariffs?

I was quoted $700 AUD down under for an imported after market Comp ramp.

That's $455 USD or $625 CAD.

Quote from: Hossamania on April 30, 2024, 05:33:07 AMI can only imagine. Are higher costs mostly due to shipping or tariffs?

I was quoted $700 AUD down under for an imported after market Comp ramp.

I can only imagine. Are higher costs mostly due to shipping or tariffs?

Glad you got it working!

replaced starter all is good cranks like a champ

Try buying in Australia Hoss . It's cruelty. 

Craig, after you changed to single plug heads did you notice any difference in your kickstarting routine? What was the motivation for changing from dual plug heads.

Well almost a year later and I put a set of the Tall Boys Cycles Footboard Relocation Kits on my 2008 bagger. I have a set as well for my 2009.

I need to adjust the shifter and then see if I need a longer shifter, but I don't think so. You can see how the board location changed from the photo above. Further forward, heel dropped down, and out a touch. I also just put new 13" shocks in place of the 12" shocks so I have additional lean angle.

I have a few more maintenance items to get done before I test ride them. I can't believe I actually have some time to work on one of mine. 

You cannot see attachments on this board.

Quote from: Deye76 on April 29, 2024, 04:31:44 PM

Quote from: Hossamania on April 29, 2024, 11:33:38 AMThey sure are proud of it!

$40.00 less than the Cycle Rama.

So I found out from a friend. Didn't know those things were that expensive.

Quote from: Hossamania on April 29, 2024, 11:33:38 AMThey sure are proud of it!

$40.00 less than the Cycle Rama.