Has anyone tried this? Is it any case drilling involved? Not S&S billet pump, aftermarket cast old style pump.
68 has upgraded pump pre were cast
I don't think that it will work correctly as passages will not line up. The cutoff year is 1972, the last year for the side oiling pinion shaft.
Use S&S 53-0013 Crankcase Oil Passage Drilling Jig to get the oil passages right. Instructions can be found here:
Drilling Jig (https://www.sscycle.com/docs/default-source/instruction-sheets/51-1041-billet-oil-pump-bt.pdf?sfvrsn=2) :hug:
Quote from: SP33DY on April 03, 2022, 10:20:29 AMUse S&S 53-0013 Crankcase Oil Passage Drilling Jig to get the oil passages right. Instructions can be found here:
Drilling Jig (https://www.sscycle.com/docs/default-source/instruction-sheets/51-1041-billet-oil-pump-bt.pdf?sfvrsn=2) :hug:
It's my understanding that you need to use an S&S pump. All S&S pumps are for end oiling pinion shafts and are the 81 and up style that splits the oil path. I do not believe that those instructions are for a end oilin
Quote from: SP33DY on April 03, 2022, 10:20:29 AMUse S&S 53-0013 Crankcase Oil Passage Drilling Jig to get the oil passages right. Instructions can be found here:
Drilling Jig (https://www.sscycle.com/docs/default-source/instruction-sheets/51-1041-billet-oil-pump-bt.pdf?sfvrsn=2) :hug:
Those instructions are for an S&S billet aluminum pump which is a different animal than a stock 73 pump.
Quote from: xlfan on March 31, 2022, 08:13:36 AMHas anyone tried this? Is it any case drilling involved? Not S&S billet pump, aftermarket cast old style pump.
Why do you want to fit a pre 68 cast pump? Also fit 6 pinion& 24 oil drive gears to ya 1968
Quote from: SP33DY on April 03, 2022, 10:20:29 AMUse S&S 53-0013 Crankcase Oil Passage Drilling Jig to get the oil passages right. Instructions can be found here:
Drilling Jig (https://www.sscycle.com/docs/default-source/instruction-sheets/51-1041-billet-oil-pump-bt.pdf?sfvrsn=2) :hug:
Correct if using 73 pump and end oiler
Quote from: JSD on April 04, 2022, 09:06:26 AMQuote from: xlfan on March 31, 2022, 08:13:36 AMHas anyone tried this? Is it any case drilling involved? Not S&S billet pump, aftermarket cast old style pump.
Why do you want to fit a pre 68 cast pump? Also fit 6 pinion& 24 oil drive gears to ya 1968
I don't want to fit a pre 68 cast iron pump, but a post 73 cast alu (not billet) pump.