HarleyTechTalk

Hello all...

I'm very happy to be a new forum sponsor here at HTT. My former username was Bikerscum, that guy that found & cured the tapping problem in the top end of Twin Cam bikes. That research and development has resulted in my own product to make that annoying tapping go away... Rockout rocker inserts. These have been a huge success with sales in the US, Canada, Germany, UK, Australia, etc.. I hear from stoked bikers all the time that were ready to give up hope until they found Rockouts!

Please take a moment to check out my website.... www.rockout.biz

There you'll find installation and ordering information, and if you have any questions please just drop me a note here or at my email rock-out@att.net

Thanks for having me 

John @ Rockout

                       

I bought a set to try out next time I do something to the 117 inch. They shipped and arrived very fast, look to be well made too. 

Congrats John and kudos on the good work.  Ill check out the site and be in contact with you soon.

Welcome aboard,I have read good things about your Products,wish you well here....... 🇺🇸

Hey John, best of luck here! Just joined this site myself, and wondering why I didn't check it out before this.

They haven't arrived, but it's only been a couple of days and I don't have the 585's yet anyway...

You've got a solid product that's going to help a lot of us with the top end knock. Mine reminds me of woodblocks being played.

Thanks guys for the warm welcome 

If I can answer any questions or help in any way just holler.

John

  Welcome,

Glad to see you have a place to sell these units...

Should do great here, I'll be trying to send you business too... Not me for right now But for the many here on this site AND other places... Talk helps...

signed....BUBBIE

Thanks Bubbie, every bit helps. You're right, talk isn't just important, it's critical.

'Course it's up to me to make sure the talk is positive 

So far the feedback has been awesome 

Good luck guys, love to see new vendors.

~John

Do the rockout rocker lockers work with the SE forged rocker supports ?

Quote from: 2006FXDCI on December 07, 2015, 05:19:27 PM
Do the rockout rocker lockers work with the SE forged rocker supports ?

That's a great question, one that comes up from time to time. The answer is..... I've been told they do. I hesitate to make claims on something I don't hold in my hand, but the guy who tested them is solid. He sent me some pics.... a few of the support/shaft and one of the Rockouts installed. I don't know if it makes any difference but this was on a 110 CVO...









The guy said it absolutely stopped the rocking. Still, I would like to see another confirmation that they fit before I state a definite yes. If you're up for it PM me & I'll send you a free set, I only ask for an honest evaluation.

Thanks for the interest 

FXD, your kit is on the way.

Thanks man,

John

Thank you John ! Cant wait to try them out . I will post my results here on how they work with the SE supports .

Just ordered 2 sets.1 for me and 1 for my wife's.cant wait to try them,thanks Travis   

Thanks man, please let us know how they work out for you.

John

Just ordered a set...  Good timing, as my motor is apart for a winter freshening up!   

Thank you very much for your order   

Last Week I installed the Rocker Inserts in my 02 Road King.
Prior to install sounded like a handful of nuts in the front rocker box.
After install .......... Amazing difference on idle and running down the road.
Well worth the time and effort to install. Excellent product.

That's great to hear

Thanks for your order, and for the feedback.

John

Received my rockout lockers today ! I will be installing them as soon as i get my engine components back . Thanks again John !

Thanks man.

Now who wants to try some on a Sportster or EVO? If you have the components laying around & can check for fit & function please let me know 

I have a sportster rocker support plate apart at work I can measure for you on Thursday if you want

That would be awesome Joe, thank you.

If you'd like to PM me a shipping address, I'll send you a kit to try..... see if it will fit, if not, why not, etc.

Also anyone else that would be willing to help out.

Thanks again,

John

I just send you an email I wan try ur kit  thanks in advance

Sorry, I haven't received any emails or PM's from you.

BTW is this for a Sportster or EVO? SE forged support?