Text only | Text with Images

HarleyTechTalk

Technical Forums => General => Topic started by: tolobill on September 24, 2020, 08:02:46 AM

Title: 8885 Clutch Release Bearing
Post by: tolobill on September 24, 2020, 08:02:46 AM
Hello, is there an upgrade bearing for 2015 ultra limited thanks.
Title: Re: 8885 Clutch Release Bearing
Post by: rigidthumper on September 24, 2020, 08:10:33 AM
Take some measurements, and then look at this (https://www.nationalprecision.com/ball-bearings/6000-series/6200_light/detail/6200/?xref=SKF:6200).
While researching, look at 7200B angular contact bearings.
Title: Re: 8885 Clutch Release Bearing
Post by: tolobill on September 24, 2020, 07:32:08 PM
Got it thanks, is there an upgrade to 37906-11 bearing.
Title: Re: 8885 Clutch Release Bearing
Post by: rigidthumper on September 25, 2020, 07:06:34 AM
Need dimensions to verify- someone says NTN DF07A74CS16, but it doesn't look right, and I don't have the original -11 bearing to measure.
The NTN DF07A74CS16 is 35mm ID, 72mm OD, and 21mm wide.
Title: Re: 8885 Clutch Release Bearing
Post by: tolobill on September 28, 2020, 03:59:08 PM
hello, thanks for the info, thats the bearing number and the stock one 37906-11 are both expensive 75 to 103 dollars and darn near hard to find.
Text only | Text with Images