Take control of your tuning with Power Vision PV3, Dynojet's latest ECM flash tuner for Harley Davidson. Easily flash tunes, view & log data, check & clear codes right from the device.
Fuel Moto will pre-map your PV3 for your bike & modifications so it comes ready to flash! you will be prompted for your bike info during checkout. https://www.fuelmotousa.com/series-221055
- includes on device Auto Tune Basic feature
- High contrast TFT color screen
- Easily Flash Tune your ECU
- Plug and and play installation
- Instant access to Dynojet pre-configured tunes
- pre-mapped with the Fuel Moto tune for your application
- send & receive tunes via USB
- Full tuning suite available utilizing Dynojet WinPep 8 software
- Log data and review with WinPep 8 software
- Read & Clear diagnostic trouble codes
- Tune multiple vehicles with additional Tune Licenses
- Return vehicle tune to stock at anytime
- Dynojet tunes are 49 state Legal
Auto Tune Basic information and instructions can be found on the Fuel Moto University site here
(https://www.fuelmotousa.com/images/F143855100.jpg) (https://university.fuelmotousa.com/article/how-to-use-auto-tune-basic-with-dynojet-pv3/)
Quote from: aswracing on August 31, 2022, 09:37:42 AMIs the cable the only difference between the J1850 and CAN bus versions?
Is Target Tune supported? Both the J1850 and CAN bus versions?
Cable is the only difference and all H-D applications run the same firmware. Target Tune will be officially supported soon, we're already running it with PV3 on our 2022 Softail.