Text only | Text with Images

HarleyTechTalk

Technical Forums => Audio and Electronics => Topic started by: ALUCARD19 on January 11, 2015, 06:45:36 PM

Title: HUA360 wire connections to Kenwood KDC-X798
Post by: ALUCARD19 on January 11, 2015, 06:45:36 PM
On the HUA360 I need to hook up 4 wires,
1) yellow battery
2) red ignition +12V
3) black ground
4) blue/yellow stripe

Here is where I get confused the 23 pin connector plug in the fairing plugs into the back of the HUA360,that is the easy part.
Are the 4 above listed connections coming out of the HUA360 feeding my head unit (Kenwood KDC-X798) power (ie the 23 pin connector) going into the HUA360 power going in.
Please advise as I am trying to pre-wire things ahead of time.
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: z71_fourwheelin on January 11, 2015, 06:48:53 PM
Yes... those are the only needed wires
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: UltraNutZ on January 11, 2015, 07:01:56 PM
Yes sir thats what feeds power and ground as well as yellow/blue being your steering wheel control wire
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: ALUCARD19 on January 11, 2015, 07:30:53 PM
OK thanks guys I just wanted to know for sure before I start to wire things up.
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: ALUCARD19 on January 11, 2015, 08:57:52 PM
UltraNutz what happens with the 35 pin connector from the back of the stock radio when I use an after market HU, do I just leave it hanging there since I am going to run new speaker wires to all 4 speakers coming off of my amp or do I need to splice into some of these wires?
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: UltraNutZ on January 12, 2015, 02:40:54 AM
 :up:   none of the wiring on the 35 pin connector is needed for anything since you're running your own speaker wires back to the rear pods. 
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: tdgriff on January 12, 2015, 06:53:18 PM
 have the same HU you are going to love it when you are done. I ran the rear usb up to my fairing bags just notched out the inner fairing a bit . That thing can be a beast to dial in it has so many settings its crazy.
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: ALUCARD19 on January 13, 2015, 10:01:05 AM
Quote from: tdgriff on January 12, 2015, 06:53:18 PM
have the same HU you are going to love it when you are done. I ran the rear usb up to my fairing bags just notched out the inner fairing a bit . That thing can be a beast to dial in it has so many settings its crazy.

I know I have been reading the instructions for 3 days now and I'm still confused.
I can't wait to get it all installed once I get my bike back from the shop.
Title: Re: HUA360 wire connections to Kenwood KDC-X798
Post by: tdgriff on January 13, 2015, 11:45:25 AM
Quote from: ALUCARD19 on January 13, 2015, 10:01:05 AM
Quote from: tdgriff on January 12, 2015, 06:53:18 PM
have the same HU you are going to love it when you are done. I ran the rear usb up to my fairing bags just notched out the inner fairing a bit . That thing can be a beast to dial in it has so many settings its crazy.

I know I have been reading the instructions for 3 days now and I'm still confused.
I can't wait to get it all installed once I get my bike back from the shop.
I have had it for about a year and still don't get it it all. no matter what I change it all sounds the same
Text only | Text with Images